CEM-I2-AY-U-C40-LZ-SA-157549 (Sip. No. 157549)

Choose content Açıklama Boyut çizimleri Teknik Veriler Bileşenler Aksesuar İndirme bağlantısı Sipariş verileri

Transponder-coded safety switch CEM-AY-C40, n-switching

Safety switches with guard locking for process protection and integrated evaluation electronics
Solenoid with locking force 600 N
Adhesive-force adjustment in 3 levels
Short circuit monitoring
2 safety outputs (semiconductor outputs)
Up to category 4 / PL e according to EN ISO 13849-1 for door position monitoring
With plug connector M12
Unicode
Door monitoring output
n-switching

CEM-I2-AY-U-C40-LZ-SA-157549 (Sip. No. 157549)

Açıklama

Unicode evaluation

Each actuator is highly coded (unicode). The switch detects only taught-in actuators. Additional actuators can be taught-in. Only the last actuator taught-in is detected.

Pin	Designation	Function	Potential
1	IMP	Control voltage, guard locking solenoid, 24 V DC	+ 24 V DC
2	UB	Operating voltage 24 V DC	+ 24 V DC
3	FO1A	Safety output, channel 1	PNP
4	FO1B	Safety output, channel 2	PNP
5	RST	Reset input	+ 24 V DC
6	OT	Door monitoring output	NPN
7	OL	Guard lock monitoring output	NPN
8	0 V UB	Operating voltage, 0 V	0 V DC

Secured switch-off distance s_ar	18 mm
Center offset
Solenoid	5 mm (in all directions)

Fuse
external (operating voltage UB)	1 A
rated conditional short-circuit current	100 A
Rated insulation voltage U_i	30 V
Rated impulse voltage U_imp	0.5 kV
Operating voltage
DC	24 V -15% ... +15% (PELV)
Discrepancy time	max. 10 ms
Turn-on time	700 ... 2500 ms (Guard locking active)
EMC protection requirements	Acc. to EN IEC 60947-5-3
Risk time according to EN 60947-5-3	max. 260 ms
Safety class	III
Current consumption
I UB, guard locking inactive	80 mA (Monitoring outputs not loaded)
I UB, guard locking active	350 mA (Monitoring outputs not loaded)
Test pulse duration	max. 0.8 ms
Degree of contamination (external, according to EN 60947-1)	3
	OT, OI, OL
Output type	Semiconductor output, n-switching, short circuit-proof
Output voltage
switched off	max. UB V DC
switched on	max. 0.7 V DC (at current of 20 mA)
Switching current
per monitoring output	max. 20 mA
	FO1A/FO1B
Output type	Semiconductor outputs, p-switching, short circuit-proof
Output voltage
LOW U(FO1A) / U(FO1B)	0 ... 1 V DC
HIGH U(FO1A) / U(FO1B)	UB - 1.5 ... UB V DC
Utilization category
DC-13	DC-13 24 V 150 mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
Off-state current Ir	max. 0.25 mA
Electrical switching frequency	max. 0.5 Hz
Switching current
per output	1 ... 150 mA

Connection type	Plug connector M12, 8-pin
Tightening torque
Fixing screws	4 Nm
Ready delay	12 s
Installation orientation	any
Adhesive force
adjustable	0, ca. 30, ca. 50 (Auslieferungszustand 50 N) N
Storage temperature	-25 ... 70 °C
Mechanical life
in case of use as door stop, and 1 Joule impact energy	1 x 10⁶
Shock and vibration resistance	Acc. to EN IEC 60947-5-3
Degree of protection	IP65/IP67 (In the inserted and screwed tight state)
Ambient temperature	-20 ... 55 °C
Material
Solenoid	Steel, nickel plated
Read head	Plastic (PBT)
Housing	Aluminum
Locking force F_max
in axial direction	600 N (The device signals if the locking force drops below 400N.)

Mission time	20 y
	Monitoring of the guard position
Category	4
Performance Level	PL e
PFH_D	4.5 x 10^-9

Sip. No.	157549
Makale adı	CEM-I2-AY-U-C40-LZ-SA-157549
Ağırlık	0,757kg
Gümrük sınıfı	85365019000
ECLASS	27-27-24-05 Safety-related transponder switch with guardlocking

1	Active solenoid face
2	Active read head face

CEM-I2-AY-U-C40-LZ-SA-157549 (Sip. No. 157549)

Transponder-coded safety switch CEM-AY-C40, n-switching

Açıklama

Unicode evaluation

Guard locking type

Connector assignment

Dimensional drawings

Connection examples

Teknik Veriler

Workspace

Electrical connection values

Mechanical values and environment

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

Aksesuar

İndirme

Komple paket

Tek Belgeler

Diğer Belgeler

ePlan macros

CAD Verileri

Sipariş verileri

Çerez bildirimi