CTS-C1-BP-CC-FLX-AP-VSA-167917/V20 (Sip. No. 178213)

CTS-C1-BP FlexFunction safety switch with guard locking, RFID, PVC connection cable with M12 plug connector(s), 20 switches per package

  • 20 CTS-C1-BP-CC-FLX-AP-VSA-167917 safety switches per packaging unit
CTS-C1-BP-CC-FLX-AP-VSA-167917/V20 (Sip. No. 178213)

Teknik Veriler

Electrical connection values

Solenoid operating voltage DC reverse polarity protected, regulated, residual ripple<5%, SELV
Switching load
according to UL DC 24 V, Class 2

Mechanical values and environment

Shock and vibration resistance Acc. to EN IEC 60947-5-3

Miscellaneous

Notices for UL approval Operation only with UL Class 2 power supply or equivalent measures; see operating instructions

Switch CTS-C1-BP-CC-FLX-AP-VSA-167917 (Order no. 167917)

Switch CTS-C1-BP-CC-FLX-AP-VSA-167917 (Order no. 167917)

Electrical connection values

Fuse
IMP 1 ... 8 A external
UB 1 ... 8 A external
Power consumption 9 W
rated conditional short-circuit current 100 A
Rated insulation voltage Ui 32 V
Rated impulse voltage Uimp 0.8 kV
Operating voltage DC
UB 24 V DC -15% ... +20% (reverse polarity protected, regulated, residual ripple<5%, SELV)
Discrepancy time max. 10 ms
Turn-on time max. 400 ms
EMC protection requirements Acc. to EN IEC 60947-5-3
Solenoid operating voltage DC 24 V DC -15% ... +20% reverse polarity protected, regulated, residual ripple<5%, SELV
Solenoid duty cycle 100 %
Risk time according to EN 60947-5-3 max. 200 ms
Risk time according to EN 60947-5-3, extension for each additional device max. 10 ms
Switching load
according to UL DC 24 V, Class 2
Safety class III
Current consumption
IIMP 500 mA
IUB 50 mA
Degree of contamination (external, according to EN 60947-1) 3
Monitoring outputs Ox/C
Output type p-switching, short circuit-proof
Output voltage 0.8xUB ... UB V DC
Output current
I-configuration (guard lock monitoring inactive) 1 ... 10 mA
L configuration (guard lock monitoring active) 1 ... 20 mA
Safety outputs FO1A/FO1B
Output type Semiconductor outputs, p-switching, short circuit-proof
Output voltage
UFO1A /UFO1B LOW 0 ... 1 V DC
UFO1A /UFO1B HIGH UB-4V ... UB V DC (Value at a switching current of 50mA without taking into account the cable lengths)
Output current
I-configuration (guard lock monitoring inactive) 1 ... 75 mA
L configuration (guard lock monitoring active) 1 ... 80 mA
Utilization category
DC-13 I configuration (guard lock monitoring inactive) 24V 75mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
DC-13 L configuration (guard lock monitoring active) 24V 80mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
Test pulse duration max. 0.3 ms
Test pulse interval min. 96 ms

Mechanical values and environment

Anfahrgeschwindigkeit max. 20 m/min
Extraction force 25 N
Ready delay max. 1 s
Actuating force 25 N
Installation orientation any
Storage temperature -25 ... 70 °C
Mechanical life 1 x 10⁶
Retention force 10 N
Shock and vibration resistance Acc. to EN IEC 60947-5-3
Degree of protection IP65/IP67/IP69/IP69K
Ambient temperature -20 ... 55 °C (A maximum value of +50 °C applies in the I-configuration of the switch (guard lock monitoring inactive))
Material
Safety switch housing Reinforced thermoplastic
Switch head cover Die-cast zinc
Connecting cable PVC
Locking force Fmax 5000 N
Locking force FZh 3800 N
Guard locking principle Closed-circuit current principle
Connection X1
Connection type Connecting cable with plug connector M12
Static bending radius 8x cable diameter
Cable outlet straight
Cable length 0.25 m
Number of pins 8
Safety outputs FO1A/FO1B
Switching frequency max. 0.2 Hz

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

PLMaximum SILPFHDCategoryMission time
Monitoring of the guard positionPL e36.44x10-9420 y
Guard lock monitoringPL e36.44x10-9420 y
Applies only if guard lock monitoring is active (guard locking for protection of personnel). Dependent on the actuator used.


PLMaximum SILCategoryMission time
Control of guard lockingDepending on external control of guard locking20 y


Miscellaneous

Notices for UL approval Operation only with UL Class 2 power supply or equivalent measures; see operating instructions

Bileşenler

CTS-C1-BP-CC-FLX-AP-VSA-167917
167917
CTS-C1-BP-CC-FLX-AP-VSA-167917
Safety switch with guard locking CTS-C1-BP FlexFunction, RFID, connecting cable PVC with plug connector M12
  • Closed-circuit current principle
  • Guard locking (OL) and door position 1 (OD) monitoring outputs
  • Connecting cable PVC, 25 cm, plug connector M12, 8-pin

İndirme

Komple paket

Tüm önemli belgeleri tek bir tıklama ile indirin.

İçerik:

  • Kullanım talimatları ve kullanım talimatlarına veya kısa talimatlara yapılan tüm eklemeler
  • Kullanım talimatlarını tamamlayan tüm veri sayfaları
  • Uygunluk beyanı
Paketin tamamını indirin (ZIP, 17,2 MB)

Sipariş verileri

Sip. No. 178213
Makale adı CTS-C1-BP-CC-FLX-AP-VSA-167917/V20
Ağırlık 7,24kg
Gümrük sınıfı 85365019000
ECLASS 11.0 27-27-24-05 Safety-related transponder switch with guardlocking