CTS-C2-BR-CC-FLX-AP-VAB-169613/V20 (Rend. sz. 178388)

Válasszon tartalmat Ismertetés Méretrajzok Műszaki adatok Komponensek Tartozékok Letöltési link Rendelési adatok

CTS-C2-BR FlexFunction safety switch with guard locking, RFID, PVC connection cable with M12 plug connector(s), 20 switches per package

Fuse
IMP	1 ... 8 A external
UB	1 ... 8 A external
Power consumption	9 W
rated conditional short-circuit current	100 A
Rated insulation voltage U_i	32 V
Rated impulse voltage U_imp	0.8 kV
Operating voltage DC

UB	24 V DC -15% ... +20% (reverse polarity protected, regulated, residual ripple<5%, SELV)
Discrepancy time	max. 10 ms
Turn-on time	max. 400 ms
EMC protection requirements	Acc. to EN IEC 60947-5-3
Solenoid operating voltage DC	24 V DC -15% ... +20% reverse polarity protected, regulated, residual ripple<5%, SELV
Solenoid duty cycle	100 %
Risk time according to EN 60947-5-3	max. 200 ms
Risk time according to EN 60947-5-3, extension for each additional device	max. 10 ms
Switching load
according to UL	DC 24 V, Class 2
Safety class	III
Current consumption
I_UB	50 mA
I_IMP	500 mA

Degree of contamination (external, according to EN 60947-1)	3
	Monitoring output Ox/C
Output type	p-switching, short circuit-proof
Output voltage	0.8xUB ... UB V DC
Output current	1 ... 10 mA
	Safety outputs FO1A, FO1B
Output type	Semiconductor outputs, p-switching, short circuit-proof
Output voltage
U_FO1A /U_FO1B LOW	0 ... 1 V DC
U_FO1A /U_FO1B HIGH	UB-4V ... UB V DC (Value at a switching current of 50mA without taking into account the cable lengths)
Output current
per safety output FO1A / FO1B	1 ... 75 mA
Utilization category
DC-13	24V 75mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
Test pulse duration	max. 0.3 ms
Test pulse interval	min. 96 ms

Anfahrgeschwindigkeit	max. 20 m/min
Extraction force	25 N
Ready delay	max. 5 s
Actuating force	25 N
Installation orientation	any
Storage temperature	-25 ... 70 °C
Mechanical life	1 x 10⁶
Retention force	10 N
Shock and vibration resistance	Acc. to EN IEC 60947-5-3
Degree of protection	IP65/IP67/IP69/IP69K
Ambient temperature	-20 ... 50 °C
Material
Connecting cable	PVC
Switch head cover	Die-cast zinc
Safety switch housing	Reinforced thermoplastic
Locking force F_max	5000 N
Locking force F_Zh	3800 N
Guard locking principle	Open-circuit current principle
	Connection X2
Connection type	Connecting cable with plug connector M12
Static bending radius	8x cable diameter
Cable outlet	straight
Cable length	0.25 m
Number of pins	5
	Connection X1
Connection type	Connecting cable with plug connector M12
Static bending radius	8x cable diameter
Cable outlet	straight
Cable length	0.25 m
Number of pins	8
	Safety outputs FO1A, FO1B
Switching frequency	max. 0.2 Hz

	PL	Maximum SIL	PFH_D	Category	Mission time
Monitoring of the guard position	PL e	3	6.44x10^-9	4	20 y

Notices for UL approval	Operation only with UL Class 2 power supply or equivalent measures; see operating instructions

Notices for UL approval

Operation only with UL Class 2 power supply or equivalent measures; see operating instructions

169613
CTS-C2-BR-CC-FLX-AP-VAB-169613
Safety switch with guard locking CTS-C2-BR FlexFunction, RFID, connection cable, connecting cable PVC with plug connector(s) M12

Open-circuit current principle
Guard locking for process protection
Monitoring outputs door position 1 (OD) and guard locking (OL)
Connection cable, connecting cable PVC, 25 cm, 2 x plug connector M12, 5-pin and 8-pin