KezdőlapProductsEnabling switchZSM with numerous control functionsZSM2104-167826

ZSM2104-167826 (Rend. sz. 167826)

ZSM, pushbuttons and -, EMERGENCY STOP, LED indicator, Vibration alarm, key-operated rotary switch, flying lead

  • Pushbuttons and -
  • Emergency stop
  • LED indicator (yellow)
  • Vibration signal
  • Key-operated rotary switch; key can be removed in both positions
  • Straight connector, 5 m
  • flying lead
ZSM2104-167826 (Rend. sz. 167826)

Ismertetés

3-stage function

Enabling function is active only in the second stage (center position, actuating point). If the pushbutton is released or pushed further (panic function), the enabling is removed (dependent on the wiring, see function sequence).

Pushbuttons

Using these pushbuttons, you can perform additional functions directly from the enabling switch.

Emergency stop

Dual-channel EMERGENCY STOP (red, with pull-and-turn release) on the switch housing, for various wiring concepts.

Lower position, protected by anti-kink strain relief in case of a fall.

LED indicator

The LED indicator (yellow) provides optical coverage directly on the enabling switch.

Vibration signal

The vibration signal is used for tactile feedback of the enabling position.

Key-operated rotary switch

For individual use, e.g., as an operating mode selector. The key can be removed in both positions.

Dimension drawing
Dimension drawing
Function sequence
Function sequence
Switching function
Switching function
Wiring diagram
Wiring diagram

Dimensional drawings

Dimensional drawings

Connection examples

Connection examples

Connection examples

Connection examples

Connection examples

Connection examples

Műszaki adatok

Approvals

DGUV_ET 25046_ET 25047c_UL_us_E206093_4/1

Operating and display elements

ItemColorExtrasVersionNote slide-in labelSwitching elementSlide-in labelNumberDesignation1LED
yellowLED1
Vibration motor1
+ button1
- button1
Emergency stop device1
Key can be removed in center positionKey-operated rotary switch1

Electrical connection values

Fuse max. 2 A gG
Connecting cable 23x0.14 mm² (screened)
rated conditional short-circuit current 100 A
Rated insulation voltage Ui 50 V
Rated impulse voltage Uimp 0.5 kV
Utilization category
DC-13 24V 0.3A (For additional controls)
DC-13 30 V 0.1 A (For enabling switch, caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
DC-13 24V 0.01A (For additional indicators)
Switching characteristics 3-stage enabling switch
Degree of contamination (external, according to EN 60947-1) 3

Mechanical values and environment

Connection type Flying lead with cable end sleeves
Number of changeover contacts 3 (Connection as per block diagram)
Storage temperature -25 ... 70 °C
Cable length
straight 5 m
Mechanical life 1 x 10⁶
Switching principle Snap-action contact element
Degree of protection IP54
Ambient temperature -5 ... 60 °C
Material PA, CR, TPE (Low PAH)

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

B10DMission time
Emergency stop0.1x10620 y
Enabling switch0.1x10620 y


Miscellaneous

in compliance with 60947-5-8

Letöltések

Teljes csomag

Minden fontos dokumentum letöltése egyetlen kattintással.

Tartalom:

  • A használati utasítás és a használati utasítás vagy a rövid utasítás kiegészítései
  • A használati utasítást kiegészítő adatlapok
  • A megfelelőségi nyilatkozat
Teljes csomag letöltése (ZIP, 1,7 MB)

Egyedi dokumentumok

Egyéb dokumentumok

Rendelési adatok

Rend. sz. 167826
Cikk neve ZSM2104-167826
Súly 0,95kg
Vámtarifaszám 85371098
ECLASS 11.0 27-37-12-38 Agreement switch