HomeProductsTransponder-coded safety switches with guard lockingCTSCTS-BRCTS-C1-BR-CC-FLX-AP-V05-169053

CTS-C1-BR-CC-FLX-AP-V05-169053 (Order no. 169053)

Safety switch with guard locking CTS-C1-BR FlexFunction, RFID, connection cable, connecting cable PVC

  • Closed-circuit current principle
  • Monitoring outputs guard locking (OL) and door position 1 (OD)
  • 2 x connection cable, connecting cable PVC, 5 m, flying lead, 5-core and 8-core
CTS-C1-BR-CC-FLX-AP-V05-169053 (Order no. 169053)

Description

FlexFunction

The function actuator configures the switch during setup. Depending on the function actuator selected, guard lock monitoring of the safety switch is active or inactive and the evaluation of the actuator code has a high or low coding level.

Guard locking principle

Power to unlock: On a guard with guard locking based on the closed-circuit current principle, the guard is locked by spring force until the guard locking solenoid is supplied with power. Unlocking is by solenoid force. The term mechanical guard locking is also used.

Auxiliary release

The auxiliary release on the front and rear side enables access to the machine in the event of a malfunction, e.g. a power failure.

Terminal assignment

DesignationFunctionConnecting cable conductor coloring
FI1BEnable input, channel BWH
UBElectronics operating voltage, 24 V DCBN
FO1ASafety output, channel AGN
FO1BSafety output, channel BYE
OX1/CMonitoring output 1/communicationGY
FI1AEnable input, channel APK
0VUBElectronics operating voltage, 0 V DCBU
-n.c.RD
IMMSolenoid operating voltage, 0 V DCBN
OX2Monitoring output 2WH
-n.c.BU
IMPOperating voltage of solenoid 24 V DCBK
-n.c.GY

Assignment of pins X1.5 and X2.2 depends on the function actuator

PinA-FLX-D-0C-167919A-FLX-D-0D-169044A-FLX-D-0E-169045A-FLX-D-0F-169046
L + HCI + HCL + LCI + LC
X1.3

X1.4

X1.5OL/C guard locking / communicationOL/C guard locking / communicationOL/C guard locking / communicationOL/C guard locking / communication
X2.2OD door position 1OD door position 1OD door position 1OD door position 1

Accessories required

Actuator is not included.

Dimension drawing
Dimension drawing
Wiring diagram
Wiring diagram

Dimensional drawings

Dimensional drawings
1Auxiliary release
2LEDs

Connection examples

Connection examples

Technical data

Approvals

FCC_CTS_2AJ58-18c_UL_us_E93776_5/1

Electrical connection values

Fuse
UB 1 ... 8 A external
IMP 1 ... 8 A external
Power consumption 9 W
rated conditional short-circuit current 100 A
Rated insulation voltage Ui 32 V
Rated impulse voltage Uimp 0.8 kV
Operating voltage DC
UB 24 V DC -15% ... +20% (reverse polarity protected, regulated, residual ripple<5%, SELV)
Discrepancy time max. 10 ms
Turn-on time max. 400 ms
EMC protection requirements Acc. to EN IEC 60947-5-3
Solenoid operating voltage DC 24 V DC -15% ... +20% reverse polarity protected, regulated, residual ripple<5%, SELV
Solenoid duty cycle 100 %
Risk time according to EN 60947-5-3 max. 200 ms
Risk time according to EN 60947-5-3, extension for each additional device max. 10 ms
Switching load
according to UL DC 24 V, Class 2
Safety class III
Current consumption
IUB 50 mA
IIMP 500 mA
Degree of contamination (external, according to EN 60947-1) 3
Monitoring outputs Ox/C
Output type p-switching, short circuit-proof
Output voltage 0.8xUB ... UB V DC
Output current
I-configuration (guard lock monitoring inactive) 1 ... 10 mA
L configuration (guard lock monitoring active) 1 ... 20 mA
Safety outputs FO1A/FO1B
Output type Semiconductor outputs, p-switching, short circuit-proof
Output voltage
UFO1A /UFO1B LOW 0 ... 1 V DC
UFO1A /UFO1B HIGH UB-4V ... UB V DC (Value at a switching current of 50mA without taking into account the cable lengths)
Output current
I-configuration (guard lock monitoring inactive) 1 ... 75 mA
L configuration (guard lock monitoring active) 1 ... 80 mA
Utilization category
DC-13 I configuration (guard lock monitoring inactive) 24V 75mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
DC-13 L configuration (guard lock monitoring active) 24V 80mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
Test pulse duration max. 0.3 ms
Test pulse interval min. 96 ms

Mechanical values and environment

Anfahrgeschwindigkeit max. 20 m/min
Extraction force 25 N
Ready delay max. 5 s
Actuating force 25 N
Installation orientation any
Storage temperature -25 ... 70 °C
Mechanical life 1 x 10⁶
Retention force 10 N
Shock and vibration resistance Acc. to EN IEC 60947-5-3
Degree of protection IP65/IP67/IP69/IP69K
Ambient temperature -20 ... 55 °C (A maximum value of +50 °C applies in the I-configuration of the switch (guard lock monitoring inactive))
Material
Safety switch housing Reinforced thermoplastic
Switch head cover Die-cast zinc
Connecting cable PVC
Locking force Fmax 5000 N
Locking force FZh 3800 N
Guard locking principle Closed-circuit current principle
Connection X1
Connection type Connecting cable with flying lead
Static bending radius 8x cable diameter
Cable outlet straight
Cable length 5 m
Number of pins 8
Connection X2
Connection type Connecting cable with flying lead
Static bending radius 8x cable diameter
Cable outlet straight
Cable length 5 m
Number of pins 5
Safety outputs FO1A/FO1B
Switching frequency max. 0.2 Hz

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

PLMaximum SILPFHDCategoryMission time
Monitoring of the guard positionPL e36.44x10-9420 y
Guard lock monitoringPL e36.44x10-9420 y
Applies only if guard lock monitoring is active (guard locking for protection of personnel). Dependent on the actuator used.


PLMaximum SILCategoryMission time
Control of guard lockingDepending on external control of guard locking20 y


Miscellaneous

Notices for UL approval Operation only with UL Class 2 power supply or equivalent measures; see operating instructions

Accessories

Downloads

Complete package

Download all important documents with a single click.

Content:

  • The operating instructions and any additions to the operating instructions or brief instructions
  • Any data sheets to supplement the operating instructions
  • The declaration of conformity
Download Complete Package (ZIP, 17,1 MB)

Single Documents

Other Documents

ePlan macros

Ordering data

Ordernumber 169053
Item designation CTS-C1-BR-CC-FLX-AP-V05-169053
Gross weight 1,05kg
Customs tariff number 85365019000
ECLASS 11.0 27-27-24-05 Safety-related transponder switch with guardlocking