HomeProductsTransponder-coded read heads with external evaluationCEM read headsCEM-A-LE05H-S2-104606

CEM-A-LE05H-S2-104606 (Order no. 104606)

Read head CEM-A-LE05H-S2... with guard locking without guard lock monitoring with adjustable adhesive force

  • Read head with guard locking without guard lock monitoring
  • Locking force 650 N
  • Adjustable adhesive force
  • Up to category 4 according to EN ISO 13849-1
  • Two safety screws M5x16 included
CEM-A-LE05H-S2-104606 (Order no. 104606)

Description

Combination options

Suitable for connection to a CES-AZ evaluation unit

Adjustable adhesive force

This version has an adhesive force also with the guard locking switched off. In this way it is intended, for example, to prevent the safety door from opening due to vibration or similar. The adhesive force can be adjusted using a programming adapter to 70 N, 110 N or 150 N.

Important: To change the preset adhesive force, you will need a programming adapter.

Approach direction

Approach direction

Typical operating distance

Typical operating distance

Note assured release distance sar = 20 mm for internal component failure. Safety outputs are safely switched off.

Dimension drawing
Dimension drawing
Connection solenoid operating voltage plug S1. A free-wheeling diode is already integrated into each CEM.
Connection solenoid operating voltage plug S1. A free-wheeling diode is already integrated into each CEM.
Connection solenoid operating voltage plug S1. A free-wheeling diode is already integrated into each CEM.
Connection solenoid operating voltage plug S1. A free-wheeling diode is already integrated into each CEM.

Dimensional drawings

Dimensional drawings

Connection examples

Connection examples

Connection examples

Connection examples
CES evaluation unit
X1.1U
X1.2NC
X1.30 V/GND
X1.4Functional earth
X3.1Data line
X3.3Data line
X3.4SH (shield)

Technical data

Approvals

c_UL_us_E155795_3/5

Workspace

Secured switch-off distance sar 20 mm
Secured switching distance sao
with center offset m= ±2.5 mm 0 mm
Center offset 2.5 mm
Switching hysteresis
with center offset m=0 0.7 mm

Electrical connection values

Power consumption 2.8 W
Operating voltage DC
UB 24 V DC -15% ... +10%
UCM 24 V DC -15% V DC ... +10% V DC
Solenoid duty cycle 100 %
Current consumption
on UB at UCM=0 V 25 mA
on UB at UCM=24 V 100 mA
on UCM at 24 V 10 mA

Mechanical values and environment

Connection type
X1, solenoid (yellow LED integrated in the plug) Plug connector M8x1, 4-pin, plug (with snap-action/screw terminal)
X3, read head Plug connector M8x1, 3-pin, plug (with snap-action/screw terminal)
Installation orientation any
Switching frequency
Solenoid max. 1 Hz
Adhesive force
adjustable 70/110/150 (delivery state 110 N) N
Storage temperature -25 ... 70 °C
Cable length max. 25 m
Mechanical life
in case of use as door stop, and 2 Joule impact energy 1 x 10⁶
Degree of protection IP67
Ambient temperature -25 ... 50 °C
Material
Read head Plastic (PPS)
Solenoid Steel, nickel plated
Housing Die-cast aluminum
Locking force F
(not monitored, in axial direction) at UCM=24 V 650 N
Guard locking principle Open-circuit current principle

Accessories

Downloads

Complete package

Download all important documents with a single click.

Content:

  • The operating instructions and any additions to the operating instructions or brief instructions
  • Any data sheets to supplement the operating instructions
  • The declaration of conformity
Download Complete Package (ZIP, 1,0 MB)

Single Documents

Other Documents

ePlan macros

Ordering data

Ordernumber 104606
Item designation CEM-A-LE05H-S2-104606
Gross weight 0,432kg
Customs tariff number 85365019000
ECLASS 11.0 27-27-24-05 Safety-related transponder switch with guardlocking