KezdőlapProductsEnabling switchZSM with numerous control functionsZSM2101-099715

ZSM2101-099715 (Rend. sz. 099715)

ZSM, pushbuttons and -, machine stop, LED indicator, vibration signal, key-operated rotary switch, flying lead

  • Pushbuttons and -
  • Machine stop
  • LED indicator (yellow)
  • Vibration signal
  • Key-operated rotary switch, key removable in one position
  • Straight connector, 5 m
  • flying lead
ZSM2101-099715 (Rend. sz. 099715)

Ismertetés

3-stage function

Enabling function is active only in the second stage (center position, actuating point). If the pushbutton is released or pushed further (panic function), the enabling is removed (dependent on the wiring, see function sequence).

Pushbuttons

Using these pushbuttons, you can perform additional functions directly from the enabling switch.

Machine stop

Machine stop (gray/yellow, with pull-to-reset and turn-to-reset) on the switch housing, for different wiring concepts.

Lower position, protected by anti-kink strain relief in case of a fall.

LED indicator

The LED indicator (yellow) provides optical coverage directly on the enabling switch.

Vibration signal

The vibration signal is used for tactile feedback of the enabling position.

Key-operated rotary switch

For individual use, e.g., as an operating mode selector. Key can be removed in one position.

Dimension drawing
Dimension drawing
Function sequence
Function sequence
Switching element
Switching element
Wiring diagram
Wiring diagram

Dimensional drawings

Dimensional drawings

Connection examples

Connection examples

Connection examples

Connection examples

Connection examples

Connection examples

Műszaki adatok

Approvals

DGUV_ET 25046_ET 25047c_UL_us_E206093_4/1

Operating and display elements

ItemColorExtrasNote slide-in labelSwitching elementSlide-in labelVersionNumberDesignation1LED
grayMachine stop1
Vibration motor1
yellowLED1
- button1
Key-operated rotary switch1
+ button1

Electrical connection values

Fuse max. 2 A gG
Connecting cable 23x0.14 mm² (screened)
rated conditional short-circuit current 100 A
Rated insulation voltage Ui 50 V
Rated impulse voltage Uimp 0.5 kV
Utilization category
DC-13 30 V 0.1 A (For enabling switch, caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
DC-13 24V 0.3A (For additional controls)
DC-13 24V 0.01A (For additional indicators)
Switching characteristics 3-stage enabling switch
Degree of contamination (external, according to EN 60947-1) 3

Mechanical values and environment

Connection type flying lead
Number of changeover contacts 3 (Connection as per block diagram)
Storage temperature -25 ... 70 °C
Cable length
straight 5 m
Mechanical life 1 x 10⁶
Switching principle Snap-action contact element
Degree of protection IP54
Ambient temperature -5 ... 60 °C
Material PA, CR, TPE (Low PAH)

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

B10DMission time
Enabling switch0.1x10620 y


Miscellaneous

in compliance with 60947-5-8

Letöltések

Teljes csomag

Minden fontos dokumentum letöltése egyetlen kattintással.

Tartalom:

  • A használati utasítás és a használati utasítás vagy a rövid utasítás kiegészítései
  • A használati utasítást kiegészítő adatlapok
  • A megfelelőségi nyilatkozat
Teljes csomag letöltése (ZIP, 1,7 MB)

Egyedi dokumentumok

Egyéb dokumentumok

Rendelési adatok

Rend. sz. 099715
Cikk neve ZSM2101-099715
Súly 0,949kg
Vámtarifaszám 85371098
ECLASS 11.0 27-37-12-38 Agreement switch