KezdőlapProductsTransponder-coded safety switches with guard lockingCEM-C40CEM-AR-C40CEM-I2-AR-M-C40-SH-113739

CEM-I2-AR-M-C40-SH-113739 (Rend. sz. 113739)

CEM-AR-C40 safety switch with guard locking, RFID, M23 plug connector(s)

  • Multicode
  • Guard lock monitoring output OL
  • Door Position (OT) Monitoring Output
  • Diagnostic monitoring output OI
  • Plug connector M23 (RC18), 19-pin
CEM-I2-AR-M-C40-SH-113739 (Rend. sz. 113739)

Ismertetés

Guard locking principle

Operating current (power to lock): In a safety guard with guard locking based on the open-circuit current principle, the safety guard remains locked until the power supply to the guard locking solenoid is interrupted. This is also referred to as an electrical guard locking.

Adjustable adhesive force

The adhesive force can be adjusted to 0 N, approx. 30 N, and approx. 50 N (Delivery state) using a parameterization key (order no. 125481). The adhesive force is effective when the guard locking is inactive. This prevents, for example, the safety guard from opening on its own. The operating voltage UB must be applied for this to work.

Multicode evaluation

It is checked whether the actuator is of a type that can be detected by the system (multicode evaluation). The system possesses a low coding level. Every suitable actuator is detected by the switch.

Accessories required

Actuator is not included.

Dimension drawing
Dimension drawing
Wiring diagram
Wiring diagram
Transponder-coded safety Switch CEM-C40
Mounting and set up CEM-AR-C40
CEM-AR-C40: Mounting and function lockout bar
CEM-AR-C40: Adhesive-force adjustment in 3 levels

Dimensional drawings

Dimensional drawings
1Active solenoid face
2Active read head face

Connection examples

Connection examples

Műszaki adatok

Approvals

c_UL_us_E155795_3/11

Workspace

Secured switch-off distance sar 18 mm
Center offset
Solenoid 5 mm (in all directions)

Electrical connection values

Fuse
external (operating voltage UB) 1 A
rated conditional short-circuit current 100 A
Rated insulation voltage Ui 30 V
Rated impulse voltage Uimp 0.5 kV
Operating voltage
DC 24 V -15% ... +15% (PELV)
Discrepancy time max. 10 ms
Turn-on time 700 ... 2500 ms (Guard locking active)
EMC protection requirements Acc. to EN IEC 60947-5-3
Risk time according to EN 60947-5-3 max. 260 ms
Risk time according to EN 60947-5-3, extension for each additional device max. 5 ms
Safety class III
Current consumption
I UB, guard locking active 350 mA (Monitoring outputs not loaded)
I UB, guard locking inactive 80 mA (Monitoring outputs not loaded)
I IMP, control input min. 20 mA
Degree of contamination (external, according to EN 60947-1) 3
OT, OI, OL
Output type Semiconductor output, p-switching, short circuit-proof
Output voltage 0.8 x UB ... UB V DC
Switching current
per monitoring output max. 50 mA
FO1A/FO1B
Output type Semiconductor outputs, p-switching, short circuit-proof
Output voltage
LOW U(FO1A) / U(FO1B) 0 ... 1 V DC
HIGH U(FO1A) / U(FO1B) UB - 1.5 ... UB V DC
Utilization category
DC-13 DC-13 24 V 150 mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads)
Off-state current Ir max. 0.25 mA
Electrical switching frequency max. 0.5 Hz
Switching current
per output 1 ... 150 mA

Mechanical values and environment

Connection type Plug connector M23, 19-pin
Tightening torque
Fixing screws 4 Nm
Ready delay 12 s
Installation orientation any
Adhesive force
adjustable 0, ca. 30, ca. 50 (Auslieferungszustand 50 N) N
Storage temperature -25 ... 70 °C
Mechanical life
in case of use as door stop, and 1 Joule impact energy 1 x 10⁶
Shock and vibration resistance Acc. to EN IEC 60947-5-3
Degree of protection IP65/IP67 (In the inserted and screwed tight state)
Ambient temperature -20 ... 55 °C
Material
Housing Aluminum
Solenoid Steel, nickel plated
Read head Plastic (PBT)
Locking force Fmax
in axial direction 600 N (The device signals if the locking force drops below 400N.)

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

Mission time 20 y
Monitoring of the guard position
Category 4
Performance Level PL e
PFHD 4.5 x 10-9

Tartozékok

Letöltések

Teljes csomag

Minden fontos dokumentum letöltése egyetlen kattintással.

Tartalom:

  • A használati utasítás és a használati utasítás vagy a rövid utasítás kiegészítései
  • A használati utasítást kiegészítő adatlapok
  • A megfelelőségi nyilatkozat
Teljes csomag letöltése (ZIP, 7,0 MB)

Egyedi dokumentumok

Egyéb dokumentumok

ePlan macros

Rendelési adatok

Rend. sz. 113739
Cikk neve CEM-I2-AR-M-C40-SH-113739
Súly 0,779kg
Vámtarifaszám 85365019000
ECLASS 27-27-24-05 Safety-related transponder switch with guardlocking