News About Us Products Services Press Contact Sitemap Home

09/2008
SafetyBook – An Introduction to Safety Engineering

This is the title of the recently published specialist book from EUCHNER. This manufacturer of safety switches from Leinfelden now supports its customers with a wealth of specialist knowledge.

Complete article available to download in PDF
300 dpi illustrations to download

 

04/2008
Maximize the possibilities – The new evaluation units CMS-E-ER/-FR

With the new evaluation units in the series CMSE-ER and CMS-E-FR for magnetically coded safety switches, EUCHNER is rounding off its range of magnetically coded safety systems.

Complete article available to download in PDF
300 dpi illustrations to download

 

04/2008
Space-saving and functional – The new safety relay ESM-BA701

EUCHNER makes space in the control cabinet with its new safety relay ESM-BA701. For the first time, the manufacturer of safety components has integrated seven safety contacts, four auxiliary contacts and two monitoring outputs into a slimline standard housing 45 mm wide.

Complete article available to download in PDF
300 dpi illustrations to download

 

04/2008
The AS-i revolution: Safety at Work goes into the third generation – Or: how you can provide safety in your interlinked system using two wires

With the new gateway monitor GMOx, EUCHNER is making the integration of safety technology into interlinked systems a straightforward exercise. The third generation devices are full of innovations, such as the coupling of bus systems, improved ease of use, simpler programming software and maximum freedom on setting up refined shutdown hierarchies.

Complete article available to download in PDF
300 dpi illustrations to download

 

04/2008
Smaller than ever before – The new handwheel HKB

The new handwheel HKB from EUCHNER offers all the advantages you would expect from the proven handwheels with magnetic detent mechanism. And that with very small dimensions, very low weight and low installation depth. These features provide more design flexibility.

Complete article available to download in PDF
300 dpi illustrations to download

 

04/2008
NQ and TQ – The new space savers from EUCHNER

The safety switches in the new series NQ and TQ are the smallest safety switches of its type with their highly compact plastic housings. The new TQ series is designed with compact dimensions of 75 x 75 x 15 mm, so that installation is possible even in cases where space is much too tight for other guard locking solutions. Despite its small size, this safety switch has five switching contacts and a status LED.

Complete article available to download in PDF
300 dpi illustrations TQ to download
300 dpi illustrations NQ to download

 

04/2008
Sometimes innovation is clear at a glance – The STP Extended

EUCHNER, the expert for safety switches from Leinfelden, is gradually equipping its switch series with useful additional functions. The proven features of the standard versions are of course retained.

Complete article available to download in PDF
300 dpi illustrations to download

 

04/2008
A lot of CES in little space – The safety switch CES-AP-C

The CES-AP-C makes the CES transponder technology from EUCHNER available to protect even very small guards and doors. The typical features of the CES system such as large read distance and center offset are naturally also offered by the CES-AP-C. What is more, mounting on profile rails couldn't be easier – even mounting at an angle is possible.

Complete article available to download in PDF
300 dpi illustrations to download

 

10/2007
The non-contact guard locking CET - an advanced combination

Mechanical safety switches with guard locking for monitoring safety guards have been available for many years. With its non-contact guard locking CET, EUCHNER is now breaking new ground and combining non-contact transponder technology with mechanical guard locking.

Complete article available to download in PDF
300 dpi illustrations to download

 

09/2007
New Safety Standards EN 62061 and EN ISO 13849-1 – What a Change!

How does existing "Safety Engineering" match up with the new standards? Is it necessary to start again and do things differently? The clear answer is "No". In the future, existing safety engineering will be completely adequate for the protection of people and machines - provided that the "safety engineering" and the components are used correctly. This was the situation in the past and continues to be so with the introduction of new standards.", says Jens Rothenburg, Standards and Safety Expert at EUCHNER GmbH + Co. KG in Leinfelden.

Complete article available to download in PDF
300 dpi illustration to download

 

04/2007
Non-contact safety switch CES-AR-C

Non-contact switching in series – the new CES-AR-C from EUCHNER makes it possible to monitor several safety guards at once. Up to 20 devices can be included in one switch chain.

Complete article available to download in PDF
300 dpi illustration to download

 

04/2007
Enabling Switch ZSM

Versatility is the key – the new ZSM enabling switch from EUCHNER is more than just an ordinary enabling switch. It sets itself apart from other manually operated control devices thanks to its modular and ergonomic design, which makes it suitable for many different functions.

Complete article available to download in PDF
300 dpi illustration to download

 

04/2007
Safety Switches STP Twin and SGP Twin

Two doors but only one switch for protection? Is that possible? EUCHNER says yes, and for the first time offers the possibility of protecting two doors simultaneously with its two new safety switches STP Twin and SGP Twin.

Complete article available to download in PDF
300 dpi illustration STP Twin to download
300 dpi illustration SGP Twin to download

 

04/2007
Gateway monitor facilitates bus traffic

Now only one device is necessary to connect a safe AS-Interface bus to a Profibus. With the new GMO from EUCHNER, the Profibus gateway und ASInterface monitor are combined in one device. The integrated 2nd generation monitor in particular offers a host of convincing functions.

Complete article available to download in PDF
300 dpi illustration to download

 

04/2007
Electronic-Key-System EKS FSA

Security was yesterday. Security together with safety is the future. And the future is available today. With the Electronic Key System EKS FSA (For Safety Applications), EUCHNER has opened up completely new possibilities for access management combined with state-of-the art safety technology.

Complete article available to download in PDF
300 dpi illustration to download

 

11/2006
Light and corrosion-free – EUCHNER presents its new bolt made of plastic.

The new plastic bolt GFK from EUCHNER was designed for small, light safety guards. Thanks to its corrosion-free materials, it is particularly suitable for aggressive ambient conditions.

Complete article available to download in PDF
300 dpi illustration to download

 

11/2006
Safety switch STA

the familiar, proven safety switches STP and TP from EUCHNER are now available in a completely metal design

Complete article available to download in PDF
300 dpi illustration to download

 

11/2006
No chance of getting locked in –
new switch concept from EUCHNER

With the safety switch STF, EUCHNER GmbH + Co. KG is presenting a new concept for the protection of accessible systems. With the new safety guard locking, it is possible to prevent locking people inside a danger area unintentionally.

Complete article available to download in PDF
300 dpi illustration to download

 

04/2006
More flexibility
An addition has been made to the proven EUCHNER
hand-held pendant stations.

The latest member of the HBA family has a keypad with 14 freely configurable keys including LEDs. EUCHNER has been successful on the hand-held pendant station market for more than 20 years. Along with the two familiar housing versions, HBE and HBL, the housing series HBA has also been developed successfully. With the new variant, the HBA-096692, the company is now presenting a device that enables the keypad to be flexibly designed and configured.

Complete article available to download in PDF
300 dpi illustration to download

 

04/2006
Locking in prevented
The new safety switch STF prevents unintentional
locking inside a danger area.


EUCHNER GmbH + Co. KG from Leinfelden near Stuttgart is also presenting many new products this year. One of these new products is the safety switch STF with guard locking, guard locking monitoring and additional latch.

Complete article available to download in PDF
300 dpi illustration to download

 

04/2006
The first non-contact guard locking
EUCHNER expands its non-contact safety switches CEM with solenoids.

Due to the integrated monitoring of the solenoid, the switch can be used for guard locking with guard locking monitoring.

Complete article available to download in PDF
300 dpi illustration to download

 
Press Releases
Archive